欢迎光临艾思荔老化试验箱厂家 企业风采| 收藏本站| 愿景使命| 联系艾思荔
全国热线
135 3237 0059

推荐产品

咨询热线:

135 3237 0059

邮件: asli898@163.com

电话:0769-22851840

地址: 广东省东莞市东城立新金汇工业园

当前位置:老化试验箱 > 老化试验箱 > 老化试验箱标准 > ASTM D4637标准介绍
发布时间:2019-12-20 09:38    点击数:

ASTM D4637标准介绍

  • 产品简介:
  • 咨询热线:135 3237 0059
  • 产品详情

本页面标准信息均来源于网络收集,或由参与标准制定的供应商提供,只作为参考使用,为确保测试结果的准确性、节省您的时间,如需ASTM D4637标准详细信息或ASTM D4637具体测试方法,欢迎与我们技术人员联系或给我们留言,我们将为您相关的技术支持。
 
ASTM D4637标准介绍
 
ASTM D4637简介
1.1ASTM D4637包括由三元乙丙橡胶 (EPDM)或氯丁橡胶(CR)制成的非增强或织物增强硫化橡胶片材,这些片材拟用于暴露在外的单层屋面膜。
1 .2表征这些片材的试验方法和性能范围,是对每一类别规定的,且为保证产品适用于预定目的的最小值。
1.3现场屋顶系统设计总则,例如耐火性、现场接缝强度、耐冲击一刺穿性、材料相容性和风揭性,是必须考虑的一些因素,但不在本规格范围之列。
 
ASTM D4637简介

1. Scope
1.1 This specification covers flexible sheet made from ethylene-propylene-diene terpolymer (EPDM) intended for use in single-ply roofing membranes exposed to the weather. The tests and property limits used to characterize the sheet are values to ensure minimum quality for the intended use. The sheet may be non-reinforced, fabric- or scrim-reinforced, or fabric-backed vulcanized rubber sheet.
1.2 In-place roof system design criteria, such as fire resistance, field seaming strength, material compatibility, and uplift resistance, among others, are factors that must be considered but are beyond the scope of this specification.
1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
 
2. Referenced Documents 
ASTM Standards
D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension
D413 Test Methods for Rubber Property--Adhesion to Flexible Substrate
D471 Test Method for Rubber Property--Effect of Liquids
D518 Test Method for Rubber Deterioration--Surface Cracking
D573 Test Method for Rubber--Deterioration in an Air Oven
D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D751 Test Methods for Coated Fabrics
D816 Test Methods for Rubber Cements
D1149 Test Methods for Rubber Deterioration--Cracking in an Ozone Controlled Environment
D1204 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D2137 Test Methods for Rubber Property--Brittleness Point of Flexible Polymers and Coated Fabrics
D5602 Test Method for Static Puncture Resistance of Roofing Membrane Specimens
D5635 Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
D6382 Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
D7635/D7635M Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G155 Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
 
▼ASTM D4637第三方检测机构
以上标准信息来自互联网搜索整理,如需了解完整的ASTM D4637的信息或ASTM D4637标准解读,欢迎详询。